theres two wires, black, and red, my engines stator was like that too but when i put a new stater on it had two wires. Ok the black
wire, you just run straight to any lights, but don't have it connected to the dc circuit cause the black
wire is ac current and the red is dc. the red
wire should also have a capacitor or diode built on the
wire, well don't remove the diode cause its needed to charge the battery right. so just connect the red
wire to your old red wires charging circuit. its what i done to mine, if you need a video i think i have one on my youtube channel, motorhead45102, well heres the link
https://www.youtube.com/watch?v=Z2lsI6BjGqEjust watch the video im sure it will help you.