can I put atv tires on my original lawn tracter wheeles?

I am still trying to get some atv tires on my tractor can I just put them on my original tractor wheels with out frigging around with the hubs and stuff I don't have a welder i cant change to atv rims and hubs I need to do this with out requiring a welder

If the rim diameter is the same size (or really close) and the width rim is reasonably close, you should be able to.

Proud member of the Mower Cycle Gang... aka the "Mowrons!"

My build (Chaos is one of 3 built like this)
Chaos Build

The Mower Cycle Gang visited 1puglife in May 2014
Check out the pics and vids!

Haspin 2021 was a blast! Check out pics and vids here
Haspin 2021 thread

Join us for the annual Mowron-fest at Haspin Acres!
Haspin Acres Rally 2022!

Check out my YouTube for more tractor action, my vlog, and my bus build!
TheRainbowBoxer on YouTube

Get atv tires for an 8" rim (most common mower rim size) make sure its a 8" rim on the stock tire

hear are some tires with an 8" rim

http://www.amazon.com/Kenda-Scorpion-K290-ATV-Tire/dp/B005D2CPP8/ref=sr_1_9?ie=UTF8&qid=1371831752&sr=8-9&keywords=kenda+scorpion

http://www.amazon.com/Carlisle-Turf-Tamer-ATV-Tire/dp/B005O5YJM6/ref=sr_1_8?s=automotive&ie=UTF8&qid=1371831995&sr=1-8&keywords=carlisle+all+trail+atv+tire

http://www.rockymountainatvmc.com/p/50/81/165/723/-/30414/Douglas-MX-ATV-Tire

http://www.rockymountainatvmc.com/p/50/81/165/723/-/17501/Duro-Mud-and-Sand-ATV-Tire

http://www.rockymountainatvmc.com/p/50/81/165/723/-/8661/ITP-Mud-Lite-AT-ATV-Tire

http://www.rockymountainatvmc.com/p/50/81/165/723/-/5375/Kenda-Bear-Claw-ATV-Tire

Yup! That very first link above are the exact tires I used on my stock rims!

***Get YOUR official "Doc Locked, And Ready To Rock!" Stickers by clicking here!***
***Official Sprocket's Garage vinyl graphics and tees for sale HERE!***

lawn - can I put atv tires on my original lawn tracter wheeles? Facebo12

Put down the wrench, and come out with your hands up!-Doc "Tranny Crusher" Sprocket, ATLTF Forum Admin, Thinkerer and Tinkerer, and all-around good dood. Wink

Gen. Mayhem- https://www.atltf.com/t2597-general-mayhem-race-tractor
MULE- https://www.atltf.com/t2153-lawn-boy-utltv
MULEII- https://www.atltf.com/t3328-1970-john-deere-112-the-beginnings-of-mule-ii
MULEIII https://www.atltf.com/t4263-mule3-brainstorming-ideas-etc#58287
Wrench, Wheel, Wreck, Repeat...

Guest

short answer, yes.

longer answer, yes - if the rims are the same size. only thing to watch is fender clearance AND turning radius if mounted up front.

» 97 Murray wide body WITH PICs!
» What kind a tire would be the best for offroading but the least strain on my transaxle?
» MTD HUSKEE AKA SURGE NOT MANY WORDS
» Biggasmower's "Lawn Gone lawn boy" [2018 Build-Off Entry
» GoPro Clone, Better than the Original? SJ4000