@Hillbilly Offroading I definitely plan on having her for as long as she will live, I love that blue too but not on the dynamark I had a vision in my head to make something flashy for the ttc19, but it didn’t work out how I imagined in my head. Definitely think she needs to be a shade of red to look correct
Espyville Mudders White Trash Productions Ohio Offroad Mowers Top Tractor Challenge Host #StopStretchingTractors2021 Builds: Sears Killer, Mud Dynamark, Drift Missile, 4x4 Dynamark + many more
TTC20 was another great success, the Mud Dynamark got a nice shade of red on her again and i slapped the built 20hp vanguard in it for the competition!
i was not able to get the brake system to work out on this build for the competition(still not working) i failed to tune the carburetor to the new intake and was plagued with stalling and breaking up during full throttle, as well belt slipping issues
BUT i was able to take home another 2nd place finish this past year (2020), so i am happy
my new front axle set up has been a massive improvement over the factory set up i was running during the TTC19, it turns so much sharper and having all year to get used to it helped out a ton!
Built 20hp Vanguard specs: 20hp vanguard block -shaved and ported heads -eagle racing roller 1.5 ratio rockers -valve springs and retainers -eagle racing billet aluminum rods -high lift cam -flat top pistons -twin barrel carb & intake -ARC billet aluminum Fly Wheel -high torque starter and i added a -4.7lb crank shaft weight
i did not build this motor, i bought it used. i do not know the specs of the engine just yet. i was suppose to disassemble the engine after ttc20 to get a better idea of a horse power number from this engine, but i feel as if 40hp is a very reasonable number for this engine
in the racing mower community some of these built vanguards can push up to 60-70hp!
PICTURES TO FOLLOW
Espyville Mudders White Trash Productions Ohio Offroad Mowers Top Tractor Challenge Host #StopStretchingTractors2021 Builds: Sears Killer, Mud Dynamark, Drift Missile, 4x4 Dynamark + many more
Lets revive this ole puppy and give yall some updates, this mowchine is still alive and kicking, its gone through constant transitions and configurations through out the years landing on being my Harescramble race Mowchine this past couple years, racing the NECXC race series. Ive went to a wider stance and most importantly, BRAKES if any of you know my and the Mud Dynamark, that is i have been running this tractor For over 15 years with no brakes! Now that i have them i will NEVER go back! Huge thank you to CreepyCrawer for the custom brake kit for the 820 or i still wouldnt have working brakes. In its current set up its sporting a -20hp vangaurd with a dual barrel carb set up, upgraded valve springs and retainers -peerless 820 with a live axle conversion, roms gearset 1, and hydraulic disk brakes -5” engine and 6” trans pulley -custom 2x3x3/16 front axle with johndeere 1” spindles -front stretch of 2” - 19x7-8 sunF fronts with 1.5 gallons in each tire -24” argo rear tires -factory right foot clutch - left foot throttle and brake
Espyville Mudders White Trash Productions Ohio Offroad Mowers Top Tractor Challenge Host #StopStretchingTractors2021 Builds: Sears Killer, Mud Dynamark, Drift Missile, 4x4 Dynamark + many more
Subject: 
February 27th 2020, 3:26 pm
