Craftsman GT3000 "MUTT" Part I

Yeah something like that would be good. We'll see what I come up with.

its going to look funny tho.

Hood scoop? thad give you a couple more inches, and it could look alright.

TheBeal wrote:

Hood scoop? thad give you a couple more inches, and it could look alright.

Nah, too much potential to pull in water.

Put some grease in the trans. While I was at it I noticed my flat idler had a bit of a built in detent, plus the whole pulley had like a 1/16" of play in it. So I replaced the bearing with a new one I had lying around

Up next on "avoiding TSC's buttrape prices"...

Nice job avoiding a trip to TSC.

Thanks lol.

Sneak peeks from the romp video I'll be putting up soon...er or later

wish I had actual mud.  darn.
I await the video in earnest!!!

It wasn't even mud. I thought the hole my dad had dug with the backhoe to get gravel out of had filled back in. Turns out it just filled in with light silt that the execs just churned right up. I'll try to get it up tomorrow or Monday. Got about 45min of footage to sort through and edit.

Go to pull her out of the shop and cheap mower ball joints strike again...I'm lucky it didn't come apart in the woods.


Got her blown off with the pressure washer.

Wow. Got a bit stuck? Or just flooded out?

Bottomed out on the skidplate, plus the executioners are pretty buoyant, so not a lot of traction. Had to stick it in 1st gear and just give it a tug to walk it out.

Put a hiem joint on, left the ball joint on the other end lol.

Should do much better! Yeah that's the only way i've ever gotten stuck. I bottomed the trans on Sodzilla out on sand a couple of times.

I wish I had some sand to play in, that'd be really cool.

Clutch linkage looks good Rich! Should hold up quite nice for sure.

Thanks, it's held up great so far.

A wise man once said, "Pics are the most important part of any romp"

Looking good Rich. I wish I had that fresh wash image last year.

Are you not working on that collage for the forum banner anymore?

Working on editing videos now. Got a lot of footage to sort through...

What video editor do you use? My windows 10 editor suck severe ***.

Windows Movie Maker. It's on mom's computer, didn't come on my laptop. I have this other thing on my laptop, it's just some generic movie maker thing off the windows store(free), it's fine for simple stuff like trimming and merging and putting in photos.

Okay. I will look for it.

Got the video down to about 14 minutes. Should be up tomorrow, along with some other videos too.

I like the speed up video, I need to do that on some of my footage

It's handy for taking time out of boring, but still semi important parts of the video.

I love the sound of twins with a straight pipe; sounds like a Harley or something.